My Cart (0)
Since 1982
Ten Years of Reliability Your Trusted Partner
You are here : Home / Branding

Branding

Tips for safe operation of fence semi trailer

Tongya VEHICLE | 2020-04-01

 

Semi-trailers have becomeflatbed trailer for carssemi truck fuel tank the mainstay of today's cargo transportatiooil truck tanksemi truck fueln, but when many owners use the vehicle, they focus on the truck head and ignore the trailer. In faccement tanker partsheavy duty truck industryt, for the operation of the vehicle, the trailer is just as important as the tractor. So how should a fence semi trailer operate correctly and safely, and what should be paid attentionsemi vanstrailer standard to when using it? After reacomplete trailer serviceheavy duty truck showsding this article, I believe you will have a closer understanding of the use of semi-trailers.

 

Connection of tractor and fence semi trailer

1. The traction height of the cargo semi trailer, the size of the traction pin, the front turning radius, and the gap radius must be matched with the tractor,weight for semi trucksflatdeck trailers and it should be checked before connection;

2. Carefully check whether there is sand, dust or other foreign matter on the workautotransporter trailersemi lowboying surface of the saddle of the tractor, the tractor pin of the semi-trailer, or the tractor, and whether thebuy fuel tankerheavy truck salesre is sufficient grease;

3. Adjust the support legs to make the semi-trailer traction slide fit the height of theflatbed trailer with sidesaluminum lowboy trailer traction saddle so that the traction truck sadcommercial trailertruck and trailerdle is connected to the traction pin; then move the tractordifferent types of flatbed truckssemi truck and trailer sales slightly forward to check whesemi semi truckheavy truck transportther the connection is good;

4. Pneumatic connection

① Connect the two trachea joints (commonly known as handshake) on the tractor to the two trachea joints heavy truck transportthe truck traileron the semi-trailer (note the color of the joints: red is the supplsemi truck trailer parts near mechina trailer manufacturersy line, blue is the control line)

② After the air joints are connected to each other, you must unscrew the semisemi lowbed trailerflatbed trailer shipping-trailer air connection disconnect switch on the tractor to make it ventilate, otherwiseflat bed semi trailersfuel trucks the air cannot be supplied to the brake system of the semtypes of flatbed trailerstrailer transporti-trailer and the brake system will not work;

③ Start the engine, check for air leakage in the air circutrailer trailer trucktrailer and truck partsit, and check whether the braking systemflatbed trailer service near meheavy truck news is working properly;

5. the connection of the circuit

① Insert the cable connection plug of the tractor into the cable connectitypes of trailers for pickup trucksflatbed trailer loadingon socket on the front of the van semi-trailer;

② Check whether the electrodes are well connected, and confirm whether the truck & trailer parts near mecommercial truck weightlights work normally, and replace the electrode wiring if necessary;

fence semi trailer drawing

 

The following matters must be noticed or taken to ensure the safety of the vehicle while driving:

1. All back doors, side doors and side fences should be locked

2. When turning, the speed should be reduced to reduce the impact of the cargo on the side semi truck light showbed truck trailerwalls and prevent rollover.

3. Speed ​​should be reduced at railway crossings a truck trailertransporting new semi trucksand uneven roads to reduce the impact of cargo on trailers.

4. For the safety of vehicles and people, it is strictly prohibited to overload the cargo in the carriages duripetroleum tank trailersemi trailer manufacturingng loading or unloading or tlowboy trailer for pickup truckhowo trailer truckransportation.

5. For container transportasemi truck with dump trailertanker trailer partstion, check whether all turn locks are locked.

 

Starting and driving a stake semi trailer

1. Getting started

① Correctly operate the outriggers so that the feet of the outriggers leave the ground and rise to tank on trailersemi truck fuel tank capacitythe extreme position, ensure that the height of the outriggers' feet is not less than 320mm (when the semi-trailer iscommercial trailer servicetrailer for transport fully loaded), and then hang the handle on the hook

② Check whether the tire air pressure is the specified value

③ Check whether the air pressure of the air brake system is within theflatbed trailer weight limittanker truck types specified range, and only start when the air prtractor trailer deliverydifference between low bed and semi low bed traileressure of the gas cylinder reaches 550kPa

④ Release the parking hand brake

2. Driving

After going through the above operations, you can drive. Strictly observe the following points when going dsemi truck with a beddifferent types of truck trailersownhill:

① To prevent the brake drum from overheatinlow bed trailer trucktruck and trailer maintenanceg when going down a long slope or a steep slope, try to use the tractor engine brflatbed trailer requirementsshow semisake for braking

② Do not use the stake trailer braking system alone for a lfuel tank size semi trucksemi truck fuel tank wrapsong time

fence cargo trailer for sale

Tongya 3 axle fence cargo trailer for sale

 

Separate truck head and fence cargo semi trailer

1. The semi-trailer and truck head should be parked on a flat and solid ground.trailer distributorstrailer fuel Check whether the trailer brake is effective. After operating the support device to make the base fall toa flatbed trailerbed trailer the ground, continue to rotate the rocker, so that the semi-trailer traction slide can lift a certain garange trailerskinds of trucks and trailersp in order to exit the tractor

2. Turn off the stake semi-trailer air path connection disconnect switch on the truck head, and then remove the tractor's air supply and codifference between semi trailer and trailersemi trailer sidentrol line connectors from the trailer

3. Unplug the cable plug from the cable connection socket of the semi-trailer ansemi trailer builderstrailer walld place it on the tractor

4. Operate the locking mechanism of the traction seat to open the locking block

5. Slowly drive the tractor forward to disengage the traction pin from the traction seat, thereby separatitrailer tanksemi trailer factoryng the semi-trailer and the tractor

6. When parking for a long time, the parking handbrake valve should be operated to activattruck and trailer componentssemi bed trailere the spring energy storage brake of the brake cylinder

7. After the separation, check whethesemi truck trailer hometrailer partsr there is any abnormality in each part of the semi-trailer, loosen the water dratrailers to youflatbed 18 wheelerin valve at the lower part of the gas storage tank to drain the water in the tank

 

 

If you want more information about our semi-trailer, please click “Fence Semi Trailer“. 

 

And you can also look at other resources and products on our webssemi van trailer18 wheeler trailer truckite.

Feedback

whatsapp
chat