New Heavy Duty Low Bed Trailer Maintenance:

1. Before the new lowbed semi trailer is used for the first time,semi trailer deliveryflat bed trailers we should check it according to the “instructions for use” and tighten all external bolts and nutsweight of a semi truck tireflatbed truck for cars.

2. Within the first 300 kilometers ostart trailerheavy truck & trailer partsf a new drop deck trailer, its components are in a running state. During this period, the weight of the trailer should not exceed 80% of 18 wheeler homedump trailer with coverthe rated load, and it should not be driven on muddy roads.

3. After the new low loader trailer runs for 30-50 kilometers, check the wheels and suspension bearings for high heat or noise.18 wheeler trailer partsa truck a truck If you find any abnormality, find out the cause in time and remove it.

4. After the new low bed trailer travels 300-500 kilometers, you should tighten all bolts and nuts.

 

Maintenance of hoses in air brake systems:

In addition to observing the contents of the pre vehicle inspection, it must also perform the following maintenance.

1. For high pressure winding hoses in brake hoses, we must check it is subject to side trucksdump trailers cheapfriction, pressure, etc. 

2. For brake hoses, we must always chectrailer fuel tank capacitycommercial semi truckk whether the rubber is aging, ansidewall trailertrailer 2td immediately replace it when found.

 

lubricating:

In order to drive safely and extend the service life of low bed trailers, it is necessary to regularly replenish grease to each lubricating part. Pay attention to the following when replsemi truck trailercommercial truck fuel tankenishing grease:

1. Clean the refueling utensils and oil cups first.

2. When the oil cup cannot be filled wcontainer van trailera and a tank truckith grease, the cause should be checked, andtrailer in truck bedsemi with lowboy if it is damaged, it should blow bed trailer truckcommercial truck partse replaced.

 

4 axle 100 ton heavy duty low bed trailer testing

 

Routine inspections every week or before each transport:

The following safety inspectionsemi truck semi truckwe buy semi trailerss must be performed every week or before each shipment (whichever occurs first):

1. Check the tire pressure and adjust it to the level recommended by the tire manufacturer;

2. Check the tightness of the tire screws;

3. Check whether there is air leakage in lowboy trailer capacitydump trailerthe braking system and test whether it can be braked;

4. Check the tightness of all nuts,more trailerstruck trailer truck screws, and bolts that are suspended;

5. Check the brake connection of the tractor and semi-trailer;

6. Drain the air cylinder and tcomponents of a trailerflat bed trailer truckhe air chamber equipped with air suspension;

7. Check all the lamps and lanterns;

8. Check and ensure that the outriggers atruck and trailer typessemi truck trailer weight limitre working properly;

9. Check the wear of the moving parts.

 

Monthly inspection of truck atruck trailer containermoving trailersnd trailer:

1. Check the tightness of all suspension lowboy trailer weightlow flatbed truckcomponents (according to the torque data provided)

2. Check whether there are any breaks in the leaf spring reeds;

3. Check all brake system joints and hoses for damage and hose clips are missinflatbed trailer with covertank truck serviceg;

4. Check the proper operation of relay valves and other valves;

5. Check the wear of the sleeve otruck trailer low bedflat bed trailer salesf the tension rod;

6. Check the brake drum for cracks or abnormal wear;

7. Check whether the lubricating oil of the axle will leak;

8. Check all fasteners, focusing on the fasteners used for legs, tires, axles, etc. (in any case, nuts, commercial truck trailerstruck in trailerscrews and other fasteners should be tightened to the recommended torque parameters);

9. Check the wear of the pull pin;

10. Check whether the brakes are normal;

11. Lubricate the outriggers alow bed semi trailercommercial truck and trailer partsnd the traction plate / traction pin;

12. Check whether there is any open glue at the joints of the side wall panels, door panels and roof palowboy semi trucknew lowboy trailernels;

13. Replace worn parts with manufactured or approved partstrailer for a trailertruck trailer inside.

 

Tongya lowbed semi trailer axles and tires

 

Annual maintenance of truck and trailer:

After the vehicle has been in use for 6 months, a comprehetrailers for pickup truckslowboy trailer for pickupnsive inspection is performed esemi bed trailertrailering a side by sidevery 12 months to ensure the performance of the vehtruck trailer coverlowboy truck trailericle (including maintenance at the 6th month). The inspection scope is the same as the montshow trucks semisdump truck semi trailerhly inspection mentioned above, with the following additional provisions:

1. Remove the brake drum and thoroughsemi truck fuelflatbed trailer designly check that the brake shoes have no commercial semi truckhard trailer coveradditional or improper wear;

2. Check the brake shoe return spring, brake bushing, camshaft sleeve, brake shoe drum, etc. for damastandard truck traileroil tanker semi trailerge;

3. Check the bearing and axle connecting parts;

4. Thoroughly inspect the structure of the vehiinside trucksdump trailer trailercle and report it immediately if there is a problem;

5. Replace all worn or damaged parts with replacement parts recommsemi truck moving trailerflatbed trailer manufacturersended by Tongya Vehicle.

 

If you want more information about our semi-trailer, please click “Lowbed Semi Trailer“. 

 

And you can also look at other resources and products on our website.